Last year when this was all still a dream, I saw a fellow blogger who listed a bunch of skills to learn if you didn't already know how to accomplish them.  I knew several on her list but there were plenty that I did not know how to do. Installing a wood stove is a skill I have added to my skill set in recent days.
I knew electric heat would not be able to be my sole means of heat even in my tiny cabin.  All the locals have warned me that in most storms, especially in the winter the electric can go out and be out for 3-4 days at a time.  They advised me to get. A generator, but I don't want to be faced with going to work and leaving a generator going, or coming home to a cold cabin at night.  Earlier this summer, I posted about finding an older wood heat stove.  Two weeks ago, I decided it was time to install it.  I made sure I had a tall friend to help and give advice if I needed clarificationn.
First thing was to decide where I wanted the stove to go.  I ended up putting it in a back corner where a fan could help direct the warm air to the rest of the cabin.  Once that decision was made, I went and purchased the necessary supplies to finish the job.  It took four two foot lengths of stove pipe, then a wall thimble, a chimney cap, and a couple of ninety degree angles.  I found two that were able to rotate, which made attaching them to the connecting stove pipe sections much easier.  After a dry run of making sure it all fit, I measured six foot up the wall and traced around the bell of the wall thimble. This is a double insulated piece that protects  pipe from wall and vice versa as it passes through to the outside.  After tracing the bell, I got a tall friend to use his sawzall to cut the opening through the wall to the outside.  I had purposely not insulated or sheet rocked this section yet to make it less to cut through.  Once the opening was established, I found it easy to slide the thimble through, then run out side and attach the other collar to secure to to the wall.  Finally it was a matter of lining up and connecting sections, to the ninetys, rotating them and then passing pipe through to the outside.  Once outside, remember that you need to stabilize the pipe so it stays about 3 ft from the side wall, has a way for the pipe to dissipate the heat, and make your stack 3 foot taller than the nearest roof peak.  For me that meant taking a engineered piece that the pipe rests against, with openngsnin the side to let the heat bleed off quickly, and keep the house from getting a hot wall on the outside.  Lastly, the whole contraption is secured with cables,and plumbing strapping to secure the pipes from swaying in the Oklahoma wind.  I have had a couple fires built on cool nights now, and it draws well. My house doesn't need the electric heaters running non stop, and I love the smell of soup cooking on the wood stove!  Having a reliable source of heat allows me to enjoy the snowy evenings, and any storm that blows through this winter.